Upgrade Your 4-Channel 2.4 GHz E-Sky Honey Bee V2 Fixed Pitched (FP) Electric Helicopter |
carbon fiber rod is much of an improvement. The airframe has a battery tray for the newly improved higher capacity 11.1 volt 800 Mah LIPO battery. So, there is no underpowered heli anymore especially in high altitude areas. A slightly improved landing gear with a thicker metal tail boom and an integrated knighbridge into the tail fin is absolutely awesome. Heat sinks for the main and tail motor is a plus. Couple that with new 2.4 Ghz technology we have no more tail glitches from RF Noise. All make this heli nice to fly. The only drawback remains the rotor head assembly which is exactly the same as before. Having said that, all the metal X-treme components fit as they have on the older legacy helicopter. Below, we did the X-treme metal upgrades on the rotor head assembly and added the fast blow ATO Fuses for the main motor (10 AMP) and tail motor (3 AMP) since they are still carbon brushed. We then added the stiffer Flaming Blades and also upgraded the LIPO battery to an 11.1 volt 1,000Mah 25c for longer flight times. We upgraded the landing gear to the Super Skids 400 and added the Super Skid Super Grips for gripping the ground when landing and taking off. Lastly, we added the ON/OFF pushbutton Power switch for added convenience. |
Please read our Store Policy and Privacy Policy. Copyright © 2009 - 2010 RTF-HELI.COM
Advertisement
Advertisement
Advertisement
Description: High Performance Turnigy 11.1 Volt 1,000 Mah 3S 20C Lipo Pack w/ JST Connector- Suitable for the Walkera #4, Exceed Falcon 40, or E-Sky HBFP modified with fuse protection. Works well with the E-Sky BIG Lama, Walkera #22E, Exceed Eagle 50, E-Sky HB CP2, other 350 size helis. Spec. Minimum Capacity: 1000mAh Configuration: 3S1P / 11.1v / 3Cell Constant Discharge: 15C Peak Discharge (10sec): 20C Pack Weight: 94g Pack Size: 73 x 35 x 14mm Charge Plug: JST-XH Price: $19.99 1 piece |
Description: ON/OFF Power Pushbutton Switch for Exceed Falcon 40, Walkera #4, E-Sky HBFP, E-SKY BIG Lama, Exceed Blazing Star, Walkera HM #53, HM 53#1, and HM 53#8, and Walkera #22E/Exceed Eagle 50. (Connect between LIPO Battery and Rx.) Price: $5.99 1 piece |
Advertisement
Description: EHB002 Metal Swash Plate for E-SKY HBFP V!/V2 Price: $21.99 1 piece |
Description: EHB001 Metal Paddle Control Frame for E-SKY HBFP V1/V2 (Requires Grub screws from old plastic paddle control frame) Price: $12.99 1 piece |
Description: EK1 0201 Ring like push rod for E-SKY HBFP V2 Price: $1.99 1 pair |
Description: EHB201 Central Hub & Blade Grip SET for E-SKY HBFP V1 or V2 ** This Blade Grip v2 (EHB203) only can work with V2 Central Hub (EHB202). ** New Blade grip is NOT compatible with old Central Hub (EHB009) •Main rotor head set for the Honey Bee or Honey Bee v2. •The new central hub is equipped with feathering shaft and O-rings, which provide vibration adsorbing ability. •2 Pairs of Rubber Oring is included, Hard compound and Soft compound. •Harder O-Rings increase the responds of handling, suitable for experienced and skillful players. •Softer O-Rings will decrease the agility of the honey bee, but increase the stability and more easier to hover. Suitable to beginners. Price: $49.99 1 piece |
Description: SuperSkids® 400 Landing Gear (SLG400BK BLACK) The built-in passive suspension is designed to isolate your helicopter's frame from impact forces. (Fits Esky BIG Lama, E-SKY HBFP, E-SKY HBFP V2 , King 2, and Belt CP, Axe CP, E-flite Blade 400,Walkera DF36 and similar 400 size helis, T-rex and similar 450 helis, and some 300 size helicopters. Price: $15.99 1 piece |
MSRP $18.95
X
Description: SuperGrips -are a special silicon formula designed to last a long or vinyl floors; or countertops and glass surfaces. These skid grips are made to fit, are lightweight, but they really grip and they look great. One package includes 4 blue, 4 yellow and 4 black grips. For use with all Super Skids Landing Gear Systems. Price: $4.99 1 piece |
| Description: Disposable ATO 10 AMP Fast Blow Fuse w/ JST connectors - No soldering required. Just insert between your Rx and motor connector (Only for Exceed Falcon 40/ Walkera #4, #4-1, E-SKY HBFP) Price: $3.99 (1 piece) |
| Description: Disposable ATO 3 AMP Fast Blow Fuse w/ JST connectors - No soldering required. Just insert between your Rx and motor connector.(Only for Exceed Falcon 40/ Walkera #4, #4-1, E-SKY HBFP) Price: $3.99 (1 piece) |
RTF-HELI.COM
"The place to shop for modifications to your electric helicopter"
"The place to shop for modifications to your electric helicopter"
 |
| FAST SHIPPING AS WE ARE LOCATED IN THE U.S. |
|
| INTERNATIONAL ORDERS WELCOMED FAST SHIPPING FOR U.S.ORDERS |
Description: E-SKY HBFP V2 Horizontal Fin and Tail Strut Kit -add more support to your E-SKY HBFP V2 Tail Boom. Price: $8.99 1 piece |
| NEW !!! NEW !!! NEW !!! |
Description: M3 x 3mm Grub Screws for Metal Paddle Control Frame E-SKY HBFP V1/V2 (Required for X-treme Metal Paddle Control Frame) Price: 1.99 4 pieces |
Advertisement
Description: SuperBlades XP- is for intermediate and advanced pilots and excels at fast flight, yet remains stable at hover. XP has shallower pitch (less lift). It works with stock motors, gears and 2S LiPo ONLY IF the helicopter is light enough, but flight times may be shorter. Normally we recommend using a 12T pinion with the stock motor, or a faster motor, or a 3S LiPo battery. (see SuperBlades Installation Video at the bottom of this page) Price: $12.99 1 piece |
| NEW !!! NEW !!! NEW !!! |
| NEW !!! NEW !!! NEW !!! |
| NEW !!! NEW !!! NEW !!! |
| NEW !!! NEW !!! NEW !!! |
E-SKY HBFP V2 Menu |
 |
 |
 |
 |
 |
| NEW ! |