E-SKY HBFP V1 / V2 DIRECT DRIVE (DD) KIT

Upgrade Your Tail Motor to Direct Drive (DD) for your
2.4 GHz E-SKY HBFP (Version1 / Version 2)
4-Channel Fixed Pitched (FP) Electric Helicopter

Why

odify your perfectly new

2.4 GHz

E-SKY HBFP

V1/

V2 FP Helicopter

An impressive electric helicopter that flies like a typical single rotor 4-channel heli.

Almost

everything on the new

E-SKY HBFP V2

is designed well

except for

the tail motor which is

carbon brushed

gear driven.

In any case, the major

drawback remains the carbo

brushed tail motor

. What a

ain

to remove

let alone

the longevit

of the motor. After abo

t 3 dozen full flights on average you

have to buy a new one at about $8.00(USD) a

pop.

OUCH !!! over

a couple of months,

this h

eli

can get

expensive.

We decided to change that with an easy mounting carbon brushed N60 direct drive (DD) tail motor. Direct drive

means more power as there is no

gear

reduction and no pinions to worry about proper meshing. The tail motor is

still carbon brushed but its larger size makes the motor last longer

than the

traditional n20-n30 sized carbon

brushed tail motors. Heat sinks are still required for longer longevity for the motor.

We also replaced the

three blade

tail rotor

with a sturdy two blade tail rotor.

Below, we

added the carbon brushed direct drive tail motor with the

Super Skids XP

High Perf

ce B

ades. We a

added fast blow ATO

Fuse

for

the

main

motor (10 AMP)

and tail motor (3AMP), s

ince

both motors

are still carbon

brushed.

stly, we added the ON/OFF pushbutton

Power

switch for

added

convenience.

Heli on steroids !!!

Description: Disposable ATO 10 AMP Fast Blow Fuse w/ JST connectors - No soldering required. Just insert between
your Rx and motor connector .(Only for Exceed Falcon 40/ Walkera #4, #4-1, E-SKY HBFP V1, V2, Walkera CB180D, and Walkera
CB180Q)

Price: $3.99
(1 piece)

Description: Disposable ATO 3 AMP Fast Blow Fuse w/ JST connectors - No soldering required. Just insert between
your Rx and motor connector.(Only for Exceed Falcon 40/ Walkera #4, #4-1, E-SKY HBFP V1, V2, Walkera CB180D, and Walkera
CB180Q)

Price: $3.99
(1 piece)

Description: SuperBlades XP (4 MM Root)- is for intermediate and advanced pilots and excels at
fast flight, yet remains stable at hover. XP has shallower pitch (less lift). It works with stock motors, gears and
2S LiPo ONLY IF the helicopter is light enough, but flight times may be shorter. Normally we recommend
using a 12T pinion with the stock motor, or a faster motor, or a 3S LiPo battery.

Price: $12.99
1 piece

E-SKY HBFP V2

Description: High Performance FlightMax 11.1 Volt 1,000 Mah 3S 15C Lipo
Pack w/ JST Connector

Spec.
Minimum Capacity: 1000mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 15C
Peak Discharge (10sec): 20C
Pack Weight: 94g
Pack Size: 73 x 35 x 14mm
Charge Plug: JST-XH

Price: $19.99
1 piece

Description: High Performance TURNIGY 11.1 Volt 1,000 Mah 3S 25C Lipo Pack w/ JST
Connector

Spec.
Minimum Capacity: 1000mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 25C
Peak Discharge (10sec): 30C
Pack Weight: 94g
Pack Size: 73 x 35 x 14mm
Charge Plug: JST-XH

Price: $19.99
1 piece

RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

Description: E-SKY HBFP V2 Horizontal Fin and Tail Strut Kit -add more support
to your E-SKY HBFP V2 Tail Boom. (For E-SKY HBFP V2 ONLY with DIRECT DRIVE KIT
ONLY !!!)

Price: $8.99
1 piece

Description: ON/OFF Power
Pushbutton Switch. (Connect
between LIPO Battery and Rx.)

Price: $5.99
1 Piece

Description: SuperSkids® 200 Landing Gear (SLG200BK BLACK)
(For many small size 200-250 size helis)

SuperSkids200 fit several coaxial, 200, 250 and 300 size helicopters. They're almost unbreakable and
have a universal fit for most helis and come with adapters for others. (Works on the Walkera U-FLY, E-Sky
CP3, Walkera #5-10, Walkera CB180D, Walkera HM 53, 53#1, 53#8, and many more)

Price: $14.99
1 piece

Description: Main Motor Metal Heat Sink for 370 Carbon Brushed Motor
and Tail Motor Metal Heat Sink for N20-N30 Carbon brushed Motor
(Fits typical carbon motors for the Exceed Falcon 40, Walkera #4, E-Sky HBFP V1, V2,
Walkera CB180D, Exceed Madhawk 300, Walkera CB180Q, and N60 direct drive tail
motors)

Price: $6.49

(1) Main Motor Heat Sink
(1) Tail Motor Heat Sink

Description: XTREME PRODUCTION 2.4 Ghz Walkera 4#/ Exceed Falcon 40 V2 / E-SKY HBFP
V1/V2 Direct Drive (DD) Carbon Brushed Motor Kit - Fast turns, spins, and high speed manuvers
Excellent Tail authority.

Includes:
Carbon Brushed N60 Direct Drive TailMotor
Prop adapter for motor
Tail/Fin Combo to fit on Walkera 4# Tail Boom
8mm Tail Fin Adapter
Installation Instructions

Price: $17.99
1 Set

Description: XTEME PRODUCTION
DIRECT DRIVE (DD) CARBON
BRUSHED TAIL Motor REPLACEMENT
- (Used as a direct drive replacement
motor for above DD kit)

Price: $9.99
(1 piece)