 |
| FAST SHIPPING AS WE ARE LOCATED IN THE U.S. |
| . |
| INTERNATIONAL ORDERS WELCOMED FAST SHIPPING FOR U.S.ORDERS |
Please read our Store Policy and Privacy Policy. Copyright © 2009 - 2012 RTF-HELI.COM
Advertisement
| . |
Upgrade Your 2.4 Ghz 6-Channel E-SKY CP3 Collective Pitched (CP) Electric Helicopter |
remains that the Main motor is driven by carbon brushed motor which heats up after flying. What we did was improved the helicopter by Adding a high- speed brushless Main motor system. We didn't stop there -- we also upgraded the plastic rotor head system with a CNC metal kit and added a carbon fiber tail boom which is extremely light and strong as well as a metal tail head motor mount which doubles as a heatsink for the direct drive (DD) tail motor. We also upgraded the blades with a carbon fiber laminate blade that is slightly longer by about 10 mm. This will give the helicopter more lift with the same amount of throttle. We also added Super Skids 200, a better landing gear system from Super Skids. Finally, we added an ON/OFF power switch which is really convenient. Below are some video(s)/picture(s) with links to connect to the webpage for purchasing the parts for each mod. Mods can be combined or be stand alone. |
MAIN BRUSHLESS MOTOR KIT FOR THE 2.4 GHz E-SKY HB CP3 6-Channel CP Helicopter: Replace your stock carbon brush Main motor with a high-speed Brushless Main motor. No more heat sinks and fuses to worry about. Couple this with an upgraded 11.1Volt 1000 Mah 20c LIPO battery with a convenient ON/OFF power switch and you have a strong and responsive 6-channel CP helicopter. Plenty of power to finally accelerate this helicopter quickly. We also upgraded the helicopter in the video with a metal rotor head system as well as a carbon fiber tail boom, Metal Tail Struts, Super Skids 200, and extended Carbon Fiber laminate blades. (Click Here for More Information) |
| . |
CNC METAL ROTOR HEAD KIT FOR THE 2.4 GHz E-SKY HB CP3 6-Channel CP Helicopter: One drawback remains the rotor head assembly which is made of plastic, but that's what you get with a low cost 6-channel CP entry level helicopter. With the CNC Metal Rotor Head kit, we have a precision rotor head which allows for precise movement of the blades. Couple that with a metal composite swashplate and a strong carbon fiber tail boom attached to a metal direct drive tail holder and you have a very responsive and stylish looking Upgraded 6-Channel CP Helicopter. (Click Here for More Information) |
| . |
E-SKY HB CP3 Menu |
| . |
 |
 |
 |
 |
 |
 |
RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"
"The place to shop for modifications to your R/C Electric Helicopter"
|