WWW.RTF-HELI.COM - WALKERA CB180D 11.1 VOLT LIPO MOD

Upgrade Your 2.4 GHz Walkera CB180D / Exceed Madhawk 300
4-Channel Fixed Pitched Electric Helicopter with an
11.1 Volt LIPO Battery

Why

odify your perfectly new

2.4 GHz

alkera CB180D

/ Exceed Madhawk 300

Great News !!! You can now super charge the heli by adding an 11.1 Volt

00 Ma

20c LIPO mod. We caution that

ou should install Fuses as

well

heat sinks as the helicopter will be running hot ! Check out the Video all the wa

at the bottom of the webpage.

Super Charge your helicopter by replacing the 7.4 volt LIPO adding it with an 11.1 volt LIPO. Make sure to have the heat sinks on both motors and

fuses

installed before operating as the helicopter motors will be running hot. The video below shows the Walkera CB180D/Exceed Madhawk 300

with the

upgraded Direct Drive (DD) brushed motor kit and the 11.1 volt LIPO Upgrade. Flight time is about 5 minutes - however, this becomes a

Super Charged

Heli.

Heli on steroids !!!

Description: ON/OFF Power Pushbutton Switch for Exceed Falcon 40, Walkera #4, E-Sky HBFP, E-SKY
BIG Lama, Exceed Blazing Star, Walkera HM #53, HM 53#1, and HM 53#8, Walkera CB180D, Walkera
CB180Q, Walkera #22E/Exceed Eagle 50, and other small to medium size helis. (Connect between LIPO
Battery and Rx power input)

Price: $5.99
1 (piece)

Description: Disposable ATO 10 AMP Fast Blow Fuse w/ JST connectors - No soldering required.
Just insert between your Rx and MAIN motor connector .

Price: $3.99
(1 piece)

Description: Disposable ATO 3 AMP Fast Blow Fuse w/ JST connectors - No soldering required. Just
insert between your Rx and TAIL motor connector.

Price: $3.99
(1 piece)

Description: High Performance Turnigy 11.1 Volt 500 Mah 3S 20C Lipo Pack Lipo Pack
w/ JST Connector

Fits directy into Battery Tray (Average 5 Minutes Flight Time). Super Charge Your Heli --
See Video below.

Spec.
Minimum Capacity: 500mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 51g
Pack Size: 57 x 30 x 14mm
Charge Plug: JST-XH

Price: $11.99
1 piece

Description: Main Motor Metal Heat Sink for 370 Carbon Brushed Motor and Tail Motor Metal Heat
Sink for N20-N30 Carbon brushed Motor
(Fits typical carbon motors for the Exceed Falcon 40, Walkera #4, E-Sky HBFP V1, V2, Walkera CB180D, Exceed
Madhawk 300, Walkera CB180Q, and N60 direct drive tail motors)

Price: $4.99

(1) Main Motor Heat Sink
(1) Tail Motor Heat Sink