.

    The 2.4GHz Walkera MASTER CP Flybarless 6-channel 6-Axis single rotor Collective Pitched (CP) R/C Helicopter is very easy to fly beginner's CP Helicopter.  
    Its simple to repair as the helicopter incorporates a Main Motor and replaceable plug and play Tail motor.  No more replacing messy torque tubes and small
    plastic gears anymore.  Below are a few easy mods that enhance this really nice200 size Flybarless CP helicopter.

    BRUSHLESS MAIN MOTOR MOD:

    Replacing the Carbon brushed main motor with a brushless main motor offers higher R.P.M. levels for super thrust when you need it.  A brushless main
    motor will also last virtually forever as there are no brushes to wear out.  The brushless motor is also very efficient that no heat sinks are required as this
    motor stays cool to the touch after flying.  No need to wait until the motor cools down before flying again.

    BRUSHLESS DIRECT DRIVE (DD) TAIL MOTOR MOD:

    Replacing the Carbon brushed tail motor with a brushless Direct Drive (DD) Tail Motor offers superier rudder control when you need it.  A Brushless Direct
    Drive (DD) Tail Motor will also last virtually forever as there are no brushes to wear out. The Brushless Tail Motor also utilizes a 3-blade tail rotor for better air
    displacement producing superior rudder control. The brushless motor is also very efficient that no heat sinks are required as this motor stays cool to the
    touch after flying.  No need to wait until the motor cools down before flying again.  (Requires Main Brushless Motor Kit)

    EXTREME PRODUCTIONS 210mm CARBON FIBER BLADES:

    Some pilots prefer the carbon fiber blades.  With the Extreme Productions 210mm CF Blades you get Carbon Fiber with no plastic PVC encasement.  Easy to
    see when flying as the blades are partially painted white.

    METAL GEAR (MG) SERVOS:

    The stock servos are nylon plastic that can strip easy on minor crashes.  Metal Gear (MG) Servos offer stronger torque and faster response times resulting in
    precise movement and fast cyclic response.  They can withstand most minor crashes without stripping versus the stock servos.  The Metal Gear (MG) Servos
    are plug and play -- Just replace existing stock servos.  No need to reverse any settings on your TX.

    METAL SWASHPLATE :

    The precision metal swashplate adds to the stability and precise movement of the cyclic servos especially when used with the metal gear (MG) servos.

    TURNIGY NANO TECH 11.1 Volt 1,600Mah EXTENDED LIPO BATTERY:

    These High Performance LIPO Batteries incorporate nano technology particles that make this LIPO Charge much better than regular LIPOs.  Slides right into
    the battery cage and gives about twice the fly time compared to the stock LIPO Battery (12-15 Minutes).  Readjust the servo links for the Center of gravity (CG).
    We don't recommend stunt flying with this LIPO as the helicopter is bottom heavy.

    ON/OFF Power Switch:

    We finished off the helicopter by adding the very convenient ON/OFF Power Switch.


    XTREME PRODUCTION MODS ==> CNC METAL ROTOR HEAD ASSEMBLY ==>
                                                                   AUTO ROTATION MAIN GEAR =========>


    FUSUNO CANOPY :

    Strong and beautifully designed by FUSUNO for strength and durablity. ==>

UPGRADES for your
WALKERA MASTER CP FLYBARLESS COLLECTIVED PITCHED (CP)
6-Channel 6-Axis Gyro Electric R/C Helicopter
Please read our Store Policy and Privacy Policy.   Copyright © 2009 - 2014  RTF-HELI.COM
GameStop, Inc.
GameStop, Inc.
GameStop, Inc.
GameStop, Inc.
Advertisement
Advertisement
Microsoft Store
Microsoft Store
Microsoft Store
Microsoft Store
RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

Description:  Walkera MASTER CP MAIN Brushless Motor Kit w/programmable ESC and
13t pinion installed, pre-wired with 3.5mm Banana power plug installed.   
(Comes with
mounting screws and nylon tie wraps.)

Kit Contents:

(1) Pre-wired Main Brushless Motor Kit w/ Programmable ESC and 13t pinion installed,
pre-wired with a 3.5mm Banana Power Plug.   
(Comes with motor mounting screws and nylon
tie wraps.)
(1) Signal Converter with 2mm Banana Plugs
(4) Nylon Ties
(1) Installation Instructions


Price:   $ 74.99
1 KIT
.
.
Contact US (Click HERE )
INTERNATIONAL ORDERS
WELCOMED

FAST SHIPPING FOR
U.S.ORDERS
.

XTREME METAL SWASHPLATE FOR WALKERA MASTER CP
OTHER XP CNC METAL PARTS FOR WALKERA MASTER CP ==>


•Model: WMACP03
•Shipping Weight: 27grams
•Manufactured by: Xtreme Production




USD$22.99
.
.

Description: 2-6 Cell LIPO Battery Monitor - Check each cell voltage and total LIPO Battery voltage.  
(Just Plug into Balance Connector to Check Voltage)





Price:   $8.99
1 PIECE
.

Description: XT-60 to 3.5mm Banana Adapter Plug - These are the new connectors that are
replacing the old style Deans "T" Connector.
(Connect between XT60 LIPO and RX ESC)

Need more Battery Adapters ?
Click Here !




Price:   $6.99
1 PIECE
.

Description: ON/OFF Power Pushbutton Switch for Walkera V400D02 and other helicopters that use
a 3.5mm Banana connector.
(Connect between LIPO Battery and Rx.)





Price:   $6.99
1 PIECE
.
Main Brushless Motor
Main Brushless Motor Kit
Extreme Productions 210mm CF Blade

Description:  TURNIGY NANO-TECH 11.1 VOLT 1,600 MAH 3S 25~50C LIPO W/XT-60
CONNECTOR PLUG (EXTENDED BATTERY FOR  WALKERA MASTER CP AND V400D02
(NOT RECOMMENDED FOR AEROBATIC STUNT FLYING)
Need an XT60 to 3.5mm BANANA Battery Adapter ? -                  

Spec.
Capacity: 1600mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 143g (including wire, plug & case)
Dimensions: 120x34x18mm
Balance Plug: JST-XH
Discharge Plug: XT60


Price:   $29.99
1 PIECE

Description: Carbon Fiber Blade 210mm for 200-250 CP R/C Helicopter - Fits 200-250 sized
collective pitched R/C Helicopters such as the Align Trex 250 Series, Tarot 250, Walkera Master CP,
and others in the same class.


Specifications:
•Model: XCB210
•Shipping Weight: 78grams
•Manufactured by: Xtreme Production



Price:    $15.99
1 PAIR
Solution Graphics
.

Description:  Walkera MASTER CP METAL GEAR (MG) SERVO (WK-7.6-9)


Specifications:

  • Angle: 90 - 110 degrees
  • Torsion: 2.86 - 3.0kgf.cm
  • Speed: 77-80ms/60 degrees
  • No Load Electricity: < 300mAh
  • Load Electricity: < 500mAh



Price:    $16.99
1 PIECE
Metal Gear Servo
Extended LIPO Battery
.
Metal Swashplate
Brushless Direct Drive
(DD) Tail Motor Kit


Description:  Walkera MASTER CP BRUSHLESS Direct Drive (DD) TAIL Motor Kit w/ ESC
and 3-Blade Tail Rotor, pre-wired with JST power plug installed.   
(Requires Main Brushless
Motor Kit Above.)


Kit Contents:

(1) Pre-wired Brushless Direct Drive (DD) Tail Motor Kit w/ ESC and 3-Blade Tail Rotor
installed, pre-wired with a JST Power Plug.   
(Comes with nylon tie wraps.)
(4) Nylon Ties
(1) Installation Instructions


Price:   $ 59.99
1 KIT
.


Description:  Walkera MASTER CP Brushless Direct Drive (DD) Tail Motor Replacement
Blades. (3-Pack)








Price:   $ 8.99
3-Pack
.


Description:  Walkera Master CP Brushless Tail Shaft Adapter Replacement








Price:   $5.99
1 Piece
..
.
.
..
.
..
.
OTHER STUFF
HELICOPTER MODS
HELICOPTER ACCESSORIES
.
ALIGN TREX R/C
NEW !  
E-SKY R/C
WALKERA R/C
NEW !  
NEW !  
NEW !  
NEW !  
..
E-FLITE R/C
NEW !  
NEW !  
NEW !  
Walkera Master CP w/ FUSUNO
A
SSASIN RED Canopy

Description: Single Brushless Signal Adaptor w/2.0mm BANANA connector installed and pre-wired.
(Required for Main Brushless Motor Conversion on WALKERA Master CP/V400D02)





Price:   $29.99
1 PIECE
.