RTF-HELI.COM - MODS FOR WALKERA U-FLY and WALKERA U-FLYS

Upgrade to a FLYBARLESS Rotor Head and other mods for your
2.4 Ghz WALKERA U-FLY / WALKERA U-FLY(s)
4-Channel Fixed Pitched (FP) Electric Helicopter

Description: Walkera U-FLY 3-AXIS GYRO RX-2435- Upgrade your U-FLY to a U-FLY(s) version. The 3-axis Gyro
makes it even easier to fly this helicopter. Please remember when installing the 3-AXIS Gyro to make sure the RX is FLAT to
the airframe. The RX cannot be installed in the UPRIGHT posiion like the stock RX. Position the new RX as shown above,
otherwise the helicopter will not fly properly.

Price: $47.99
1 Piece

RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

The 2.4GHz Walkera

-FLY

and the new

U-FLY(s)

are very easy to fly 4-channel single rotor Fixed

Pitched (FP)

helicopters.

elow are a few easy mods that

we did for these class of helicopters.

Upgrade your U-FLY to a U-FLY(S) - 3-AXIS GYRO RX

While th

e U-FLY is okay to fly, upgrading the RX to the 3-AXIS GYRO RX will make it even easier to fly.

The 3G Technology allows for automatic stabilization

when flying.

ust

replac

the old RX with the new RX. It's that

simple.

Upgrade

o a FLYBARLESS Rotor Head

With the 3-axis Gyro RX

you can also now remove the flybar rotor head system by

simply removing the top rotor assembly

with

linkgages and then installing

the new flybarless rotor kit. It will make it easier to repair as

there are no more flybar paddles and flybar rods to repair anymore.

The helicopter flys great with

the new flybarless head.

Upgrade the Brushless motor to a slightly faster brushless motor increasing overall

erformance:

The Stock brushless motor is rated at 4,000rpm/KV and it can be underpowered especially with the stock 7.4v LIPO. The upgraded brushless motor spins at

4,500rpm/Kv making the helicopter

with authority. This adds more lift to the helicopter with the same amount of throttle.

dd AIRY HARDEN II Blades for withstanding minor blade crashes

These blades are strong

, light,

and flexiable blades which can withstand minor crashes without cracking.

Super Skids 200

w/adapter 22 and

ON/OFF Power Switch

We finished off the helicopter by adding the much more durable Super Skids 200 Landing Skids and added the very convenient ON/OFF Power Switch.

Description: U-FLY/U-FLY(s) Upgraded Brushless Motor Replacement - Comes with motor mounting
screws, 15t pinion installed, and bullet connectors installed. Just replace stock brushless motor.

SPECS:
Dimension: 24mm x 26mm, 37mm (with shaft)
Weight: 29g (kv4500)
Diameter of shaft: F2.4mm
Length of front shaft: F12.8mm
Lamination thickness: 0.2mm
Magnet type: 45SH

Price: $29.99
1 piece

BRUSHLESS MOTOR UPGRADE

3-AXIS GYRO RX UPGRADE for U-FLY

FLYBARLESS U-FLY(S) w/Airy Harden II X-09 Blades

Description: WALKERA U-FLY(s) FLYBARLESS CONVERSION KIT - Convert
your existing Walkera U-FLY(s) FLYBAR Rotor Head into a FLYBARLESS
Walkera U-Fly(s) Rotor Head (Requires Walkera 2.4Ghz RX-2435 3G (3-Axis Gyro
Below.).

Price: $49.99
1 Set

Description: AIRY HARDEN BLADE II - Much stronger and durable than stock blades - AX-09 Harden Blade AIRY Harden Blade II (AX-09) is definitely the best
upgrade for your helicopter. This pack has Four pieces of blades, two of them are "clockwise" blades and other two are "counter-clockwise" blades, for upper rotor
and lower rotor. (NOTE: You will only need the two clockwise blades for the U-FLY or U-FLY(s))

Extremely Tough ( 300% stronger than stock blade )
Elasticity ( better protection for blade clamp, shaft, gear and motor )
Light Weight ( do not affect performance )
Easy to install ( no modification required )

Price: $14.99
1 SET (4 Blades)

NEW !!! NEW !!! NEW !!!

Courtesy of: Jeremy Tjon

Description: SuperSkids® 200 Landing Gear (SLG200BK BLACK)
(For many small size 200-250 size helis)

SuperSkids200 fit several coaxial, 200, 250 and 300 size helicopters. They're almost unbreakable
and have a universal fit for most helis and come with adapters for others. (Works on the Walkera
U-FLY, E-Sky Lama 4, Walkera #5-10, Walkera CB180D, Walkera HM 53, 53#1, 53#8, and many more)

Price: $14.99
1 piece

Description: Adapter 22® (SLG400-A22 BLACK) - Adapts Super Skids 200/400 to work with Walkera U-FLY or Walkera U-Fly(s).
Requires Super Skids 200 above.

Price: $3.29
1 Pair

Description: SuperGrips -are a special silicon formula designed to last a long or vinyl floors; or countertops and glass surfaces.
These skid grips are made to fit, are lightweight, but they really grip and they look great. One package includes 4 blue, 4 yellow and 4
black grips. For use with all Super Skids Landing Gear Systems.

Price: $4.99
1 Set

Description: 2-6 Cell LIPO Battery Monitor - Check the Voltage of each cell on your LIPO Battery.
(Just Plug into Balance Connector to Check Voltage)

Price: $8.99
1 piece

Description: ON/OFF Power Pushbutton Switch- (Connect between LIPO Battery and Rx.)

Price: $5.99
1 piece

NEW !

WALKERA U-FLY
Mods Menu

Contact US (Click HERE )

INTERNATIONAL ORDERS
WELCOMED

FAST SHIPPING FOR
U.S.ORDERS