(1) Walkera V370D05 MAIN Brushless Motor Kit w/Programmable ESC and 21t pinion installed, pre-wired with a 3.5mm Bannana power plug installed.
(1) 7.4 Volt 1,300Mah 20c LIPO Battery w/ 3.5mm XT60 connector (Recommended)
(1) XT-60 to 3.5mm Banana Adapter Plug (recommended)
(1) ON/OFF Power Switch w/3.5mm banana connectors (Recommended)
(1) Metal Airframe Support Mount (Recommended)
(1) 5-AMP ATO Fast blow disposable fuse for Tail Motor (Recommended for protecting the Electronics when tail motor fails)
Why Convert to a brushless motor system ?
This is one of the newest Flybarless helicopters utilizing the 3G Technology (Formerly named 3-axis gyro technology). Overall the heli flys well but with a
370 carbon stock motor it makes the helicopter fly somewhat slugglish. The 370 carbon brushed stock motor also heated up very fast and didn't delivery
as much power hence a sligglish flying heli. Like most users we got tired of replacing the carbon brushed motors every 150 full flights and waiting for the
motor to cool down before flying again.
RPM levels for easier throttling and the motor stays cool to the touch after flying. This means no more waiting for the motor to cool down. So effectively, you
can fly all day just by swapping the LIPO Battery out of the battery tray.
famous Super Skids 200 landing gear system and adapter 22 used on 200-350 helis. This allowed us to mount an 7.4 volt 1,300Mah 30c LIPO resulting
in extended flight times of approximately 10-12 minutes. Lastly, we added a 5-AMP ATO Fast blow fuse to protect the Rx from the tail motor.
Why buy from us ?
brushless kits, we include all the necessary hardware like the motor screws and the nylon ties. All you have to do is just install using a screwdriver and
hexdriver for replacing the carbon brushed motor with the new brushless motor and where to connect the various connectors with the provided
instructions. No soldering required for the Main Brushless Motor installation.
Description: 2-6 Cell LIPO Battery Monitor - Check each cell voltage and total LIPO Battery voltage.
(Just Plug into Balance Connector to Check Voltage)
Description: XT-60 to 3.5mm Banana Adapter Plug - These are the new connectors that are
replacing the old style Deans "T" Connector. (Connect between XT60 LIPO)
Need more Battery Adapters ? Click Here !
Upgrade to a High Speed Main Brushless Motor System for your
2.4 Ghz WALKERA V370D05 FLYBARLESS
6-Channel Collective Pitched (CP) Electric Helicopter
Description: SuperSkids® 200 Landing Gear (SLG200BK BLACK)
The built-in passive suspension is designed to isolate your helicopter's frame from impact
forces. (Fits Walkera V370D01, D05, U-Fly, U-Flu(s), #4, and E-SKY HBFPV2. some 300 size
helicopters. (Super Grips Yellow not included - To get Super Grips Goto: Super Skid Products )
|Description: Description: R/C LED Lighting
System - R/C LED Lighting System, easy to use
on scale lighting set suittable for 30-60 size scale
model Helicopters and Aeroplanes.
2 red Beacon
2 White Strobe
1 Green navigation light
A set for landing light.
Includes flush mount LED plugs, to install in
canopies or wings.
Main board size: 35x24x8mm
LED wire length: 600mm/pc
|L.E.D. NIGHT FLYING KIT
Description: ON/OFF Power Pushbutton Switch for Walkera V400D02 and other helicopters that use
a 3.5mm Banana connector. (Connect between LIPO Battery and Rx.)
WALKERA V370D05 MENU
Description: Disposable ATO 5 AMP Fast Blow Fuse w/ JST connectors - Protect your RX and
electronicspeed controller. No soldering required. Just insert between the V370D05 ESC Controller "Tail
output" and TAIL Motor connector. (not required for main brushless kit, but completes the overall system)
Description: Walkera V370D05 MAIN Brushless Motor Kit w/programmable ESC and 21t pinion installed,
pre-wired with 3.5mm Banana power plug installed. (Comes with mounting screws and nylon tie wraps.)
(1) Pre-wired MAIN Brushless Motor Kit w/programmable ESC and 21t pinion installed, pre-wired with a 3.5mm
Banana Power Plug. (Comes with motor mounting screws and nylon tie wraps.)
(1) Signal Converter with plugs.
(4) Nylon Ties
(1) Installation Instructions
Price: $ 74.99
|Main Brushless Motor
Description: Adapter 22® (SLG400-A22 BLACK) - Adapts Super Skids 200/400 to work with Walkera V370D01,
V370D05, U-FLY or Walkera U-Fly(s). Requires Super Skids 200 above.
Description: SuperGrips -are a special silicon formula designed to last a long or vinyl floors; or countertops and glass
surfaces. These skid grips are made to fit, are lightweight, but they really grip and they look great. One package includes 4
blue, 4 yellow and 4 black grips. For use with all Super Skids Landing Gear Systems.
|Description: TURNIGY High Performance 1,300mAh 2S 20C Lipo Pack w/
XT60 Connector. (Need LIPO Battery Adapters - Click Here !)
Minimum Capacity: 1300mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 84g
Pack Size: 93 x 30 x 14mm
Charge Plug: JST-XH
Discharge plug: XT60
Description: CNC METAL Retainer Frame
Description: LIPO Battery Rubber Band Holder
FAST SHIPPING FOR