RTF-HELI.COM - BRUSHLESS MOTOR MOD FOR WALKERA 53Q

Description: Walkera 53Q (Air-Wolf) Twin Brushless motor ("A" and "B") Kit w/ two ESC's and matching
10t pinions installed, pre-wired, and a JST power plug installed.   (Comes with mounting screws and nylon tie
wraps.)

Contents:

(1) Pre-wired Twin Brushless motor ("A" and "B") Kit w/ two ESC's and matching 10t pinions installed,
pre-wired, and a JST power plug installed.   (Comes with motor mounting screws and nylon tie wraps.)

(1) Dual Signal Converter with JST Connector

(4) Nylon Ties

(1) Installation Instructions

Price:   $99.99
1 piece

Parts List:

(1) Pair of Brushless motors with pair of programmable ESC's and 10t pinions installed and pre-wired
(1) Dual Brushless Signal convertor w/JST Female connectors installed.
(1) 7.4Volt 800Mah 20c LIPO (Recommended)

Why convert to a brushless motor system ?

The story remains the same -- Like most people, my helicopter is an investment and while I wouldn't

mind progressing from a co-axial to a FP and

then

a CP

heli. I don't want to leave my older helis in the

closet collecting dust after graduating to a CP heli. I was also tired of replacing the carbon

brushed

motors every

2 dozen full flights at $1

.99(USD) a pop for a pair of 370 carbon brushed motors.

The twin brushless motors also addresses a major

problem with the

Walkera

53Q

stock motors.

These 370 carbon

brushed

stock motors heated up very fast

The twin

brus

less motors stay

warm

to the

touch even after flying.

So effectively, you can fly

all

day just

swapping

the LIPO Battery out of the new LIPO tray.

What's required for the conversion ?

While most systems just require a brushless motor and an electronic speed controller. The

Integrated four in one receivers require a

rushless

signal

converter. So basically you will need

three

items to complete a brushless motor system. You need a

pair of

brushless motor

with the

correct

pinion

install the proper pinions so the motors are ready to

ount

. You need

two

proper

electronic speed

controller (ESC)

. We use a dual

rushless

signal

converter

which limits the

overall heli

weight

You will

also need to

connect the brush motor and electronic speed controller

connected

properly

Why buy from us ?

have basically done

all

of the soldering work

pinion installation

s for the "A" and "B" motors,

ESC

ing,

JST power plug installation,

and

other

pre-

wiring

We include all the necessary hardware like

the motor

mount

screws and the nylon ties.

All you have to do is just install using a

screwdriver for

replacing

the carbon brushed motor

with the new brushless motor

and where to connect the

various connectors

ith

the provided

instructions.

NOTE: For those who have an older Exceed Blazing Star or Walkera HM 53#1

HM 53#8

, or HM53QD

, you will need to just replace the RX with the RX

2423A

(formerly RX-2413) in order for the twin brushless kit to work properly

Upgrade to a Brushless Motor System for your Walkera 53#1/53#8/53Q/53QD
Co-axial 4-Channel Electric Helicopter
(This co-axial helicopter is the updated version of the Walkera HM 53#1, 53#8, Exceed Blazing Star)

Above is the video of a wicked short flight using the modified twin brushless motors. The video will show how fast this bird can accelerate up and climb.
You can hear the brushless motors just purr with the more power than a pair of 370 carbon brushed motors. The twin brushless motor system was tested
using an 7.4v volt 800 20c LIPO (Approx. 7 minutes on average of flight time). If you have a 2.4Ghz Exceed Blazing Star or HM53QD, you will need the new
RX-2423A. This Rx will bind with your Existing TX. (WK-2401, WK-2402, or WK-2403)

Description: Walkera High Performance Blades

Main rotor blades for E-Sky E020 Big Lama, Walkera 53#1, Walkera 53#8, Walkera 53Q,
Walkera 53QD, and Exceed Blazing Star.

Price: $9.99
1 set (Four Blades)

Description: 2-6 Cell LIPO Battery Monitor - Check the Voltage of each cell on your LIPO
Battery.
(Just Plug into Balance Connector to Check Voltage)

Price: $8.99
1 piece

Description: ON/OFF Power Pushbutton Switch. (Connect between LIPO Battery and Rx.)

Price: $5.99
1 piece

Price: $129.99

RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

Twin 370 Carbon Brushed Motors that heat up or ...

Description: Walkera 53Q Receiver RX-2423A (Formerly RX-2413) - Can be used to replace
the old Rx on the Exceed Blazing Star / Walkera HM 53#1, 53#8, or 53QD. This RX is required
for the above Twin brushless motor system. So, if you want your 2.4Ghz Exceed Blazing Star
or the Walkera 53QD 4-channel Co-axial helicopter.

Price: $39.99
1 piece

Description: TURNIGY High Performance 7.4 Volt 800 Mah 2S 20C Lipo Pack Lipo Pack w/
JST Connector

Suitable for small co-axial electric helis.

Spec.
Minimum Capacity: 800mAh
Configuration: 2S1P / 7.4v / 2Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 50g
Pack Size: 57 x 29 x 14mm
Charge Plug: JST-XH

Price: $9.99
1 piece