.
Finished view of the WALKERA V400D02 w/Metal Tail Mount Support.
Please read our Store Policy and Privacy Policy. -  Contact US - Copyright © 2009 - 2012 RTF-HELI.COM
Advertisement
If you still have problems installing, please e-mail us at sales@rtf-heli.com
.
You need Java to see this applet.
INTERNATIONAL ORDERS
WELCOMED

FAST SHIPPING FOR
U.S.ORDERS
Contact US (Click HERE )
Solution Graphics

Description: Outrage 4-in-1 Hex Driver Set
1.5~ 3.0 -
An excellent addition to any flight box.

The Outrage 4-in-1 driver has a hardened
tool-steel tip, which resists corrosion & wear.
This driver also features an ergonomic and
lightweight alluminum handle that holds up to
4 sized tips - 1.5mm, 2.0mm, 2.5mm, and
3.0mm. All 4 screw driver shafts are designed
to use with only 1 handle for space and weight
savings. These tips are designed to fit nicely
inside the handle when not in use, allowing
easy storage & access. Once you use this hex
driver set, you won't want separate screw
drivers any more, and you will love having 4
wrenches in one small pocket.


Price:    $13.99
1 Set
.
RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

Parts List:

(1) WalkeraV400D02 (Century UK Neon Blaze SE) Metal Tail Mount Support.
.

2.4GHz WALKERA V400D02 FLYBARLESS METAL TAIL MOUNT SUPPORT INSTALLATION

1. First, you will need a small phillips screwdriver (not shown), a set of
1.5mm - 3.0mm Hex screwdrivers , and a sodlering iron.  This mod requires
SOME DESOLDERING/SOLDERING.

First, desolder the (RED/BLACK) power wires for the tail motor and
remove the tail assembly by gently twisting out of the tail boom.








2. Next, remove the metal tail struts with a phillips screwdriver.













3. Slids out the horizontal tail fin by loosening the set screw underneath
the horizontal tail fin.












4. You should now have both parts off the tail boom.  This is necessary to
slide in the metal tail boom support.












5.  Slide the Metal Tail Mount Support into the tail boom.  Make sure you
have the proper orientation of the tail mount like in the picture.












6. Align the mounting holes and use the 1.5mm hexdriver to install.  The
Metal Tail Mount Support goes underneath the metal airframe.












7.  Flip helicopter upside down insert the two long hex screws about 1/8
inch (3-4mm). Next, using the hexdriver, tighten the two small side hex
screws on the tail boom mount.  This will secure the tail boom to the tail
boom mount.

8.  Finally, place back the horizontal tail fin with the metal tail struts.  Place
back the tail motor assembly onto the tail boom.  Resolder the power
wires (Black/Red).  The tail motor is coded with "-" terminal for negative
black wire and the "+" terminal is for the red wire.  Solder to appropriate
designations.

Congrats!  You are done.

Installation Menu
.

Description:  EXI 15-PIECE TOOL SET w/
METAL CASE -
An excellent addition to any
flight box.

1x Ball Link Turn Buckle    
1x Ball Link Sizing
2 x 1.5mm Hexangular Screwdriver
1 x 2.0mm Hexangular Screwdriver
1 x 2.5mm Hexangular Screwdriver
1 x 3.0mm Hexangular Screwdriver
1 x + 4.00mm Screwdriver
1 x + 3mm Screwdriver
1 x 4.0mm Hexagonal socket
1 x 5.5mm Hexagonal socket
1 x Ball Link Pliers
1 x Long Nose pliers
1 x Cutter Pliers
1 x Pitch Gauge



















Price:    $39.99
1 Set
.