RTF-HELI.COM - THE PLACE TO SHOP FOR MODS TO YOUR R/C ELECTRIC HELICOPTER

Language Translator

RTF-HELI.COM

are dedicated to

king

our 4-channel

single rotor

ixed

itched

(FP)

electric helicopter

4-channel co-axial

helicopter

, and 6-channel

Collective

Pitched

(CP)

the best

it can be

by enhancing it through

modifications.

Please feel

free to

visit

each

modification

on the

side

menu bar.

You will also

find

that

we are

selling

some of

the

necessary

components to

make

the

modifications

Look

for further announcements, as

will be adding additional

mods

Visitor:

Tutorial

TWIN BRUSHLESS KIT for the 2.4GHz WALKERA LAMA
400D/400/400Q/EC-135 :

This is one of the bigger sized co-axial helicopters with metal rotor heads, a
port for an L.E.D. Lighting system, and an extended shaft and larger sized 11.1v
LIPO Battery, the stock motors remain carbon brushed making this heli fly
slugglishly slow. We have alleviated the slow flying with a set of high
performance twin brushless motors, supported by the lighter and more
flexiable Super Skids Landing Gear system. An ON/OFF Pushbutton Power
switch adds convenience and real metal tail struts give much better support.

(Move your mouse pointer over the picture below to see the difference.)

TWIN BRUSHLESS KIT for E-SKY BIG LAMA / Twinstar CA (35MHz/72MHz and
2.4GHz Version):

Why settle for a plain 4-Channel E-Sky BIG Lama / Twinstar CA Co-Axial
35/72Mhz and 2.4GHz when you could have it all. A totally brushless helicopter.
Twin Brushless Motors connected by the Super Skids 400 landing gear
system and a LIPO Battery tray that fits standard 11.1 volt LIPO Batteries.
Retrofitted with the Walkera High Performance Blades and an 11.1 volt
1,000Mah LIPO for plenty of power.

(Move your mouse pointer over the picture below to see the difference.)

R/C L.E.D. LIGHT KIT:

Night Flying is now available. Below is a video of the E-SKY BIG Lama twin
brushless motor system with the Super Skids 400 Landing Gear system and
battery LIPO tray. This R/C L.E.D. System is an inexpensive way to light up the
night. Just plug into any empty Channel on your Rx. Will work on most R/C
Electric Helicopters with a servo port or extra channel on Rx..

(Click Here for More Information)

4-Channel Co-Axial Helicopter Modifications

4-Channel Single Rotor Fixed Pitched (FP) Helicopter Modifications

E-SKY BIG LAMA / TWINSTAR CA - XTREME SEPARATE CANOPY/TAIL BOOM
MOD :

The separate canopy and tail boom addresses the problem of the stock canopy
that once it breaks its a lot of money for another. The modification of a separate
canopy and tail boom allows for low cost replacement parts. That is to say if
the canopy broke, then that would be the only part to fix. The same can also be
said for the tail boom. With this mod we also get a different look for the heli
which can be refreshing at times.
(Click Here for More Information)

DIRECT DRIVE (DD) CARBON BRUSHED TAIL MOTOR KIT FOR WALKERA
CB180D / EXCEEED MADHAWK 300 (2.4 GHZ Version):

An impressive electric helicopter that flies like a typical co-axial but is a single
rotor 4-channel heli. Almost everything on the new Walkera CB180D is
designed well except for the tail motor which is shaft gear driven. We have
changed the tail rotor system to a Direct Drive (DD) tail rotor system for better
Rudder control. We also replaced the rotor blades with a stronger two blade
propeller. We also added the Walkera High Performance Blades which is
more flexible than the stock blades.
(Move your mouse pointer over the picture below to see the difference.)

Subscribe to
Our FREE Video
Channel At:
(Click Below)

EX TENDED BLADE MOD for the WALKERA CB180D / EXCEED MADHAWK 300
(2.4GHz Version):

Regardless if you have upgraded your heli to the Direct Drive (DD) Tail motor
system or not, the extended blade Mod will add more lift capabililty to your heli.
Drive Motor System, 11.1 Volt 500Mah LIPO upgrade, Super Skids 200, ATO
Fast Blow Mini-Blade fuses, and an ON/OFF Power Switch and the heli takes
off like a rocket.

(Click Here for More Information)

6-Channel Single Rotor Collective Pitched (CP) Helicopter Modifications

DIRECT DRIVE (DD) TAIL MOTOR KIT FOR THE 2.4 GHz WALKERA 4# / EXCEED
FALCON 40 V2 4-Channel FIXED PITCHED:

A Direct Drive (DD) Tail Motor modification will give superior tail authority
making way for fast turns and high speed maneuvers. No more gear reduction
from a stock tail motor that lasts about only three dozen flights before failing.
When connected by the Super Skids 200 landing Gear System and the Super
Blades Titanium Tail Boom, an upgraded 11.1 volt 800mah 30c LIPO for plenty
of power, and a convenient ON/OFF Power Switch makes it a blinged out
4-Channel FP helicopter.

(Click Here for More Information)

CNC METAL ROTOR HEAD KIT FOR THE 2.4 GHz WALKERA 4# / EXCEED
FALCON 40 V2 4-Channel F P Helicopter:

One drawback remains the rotor head assembly which is made of plastic, but
CNC Metal Rotor Head kit, we have a precision rotor head which allows for
precise movement of the blades. Couple that with a metal swashplate, metal
gear servos, metal airframe plate, and a strong titanium tail boom from Super
Skids, Super Skids 200 landing gear, and you have a very responsive and
stylish looking Upgraded 4-Channel FP Helicopter.

(Click Here for More Information)

Click on Image below for more information on this R/C Helicopter or to see all

helicopters click on the R/C RTF HELICOPTER KITS

R/C Helicopter Kits

RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"

INTERNATIONAL
ORDERS
WELCOMED

FAST SHIPPING
FOR U.S.ORDERS

Contact US (Click HERE )

MAIN BRUSHLESS MOTOR KIT FOR THE 2.4 GHz WALKERA V400D02
FLYBARLESS 6-Channel CP Helicopter (CENTURY NEON BLAZE SE):

Replace your stock carbon brush Main motor with a high-speed Brushless
Main motor. No more heat sinks and fuses to worry about. Couple this with an
upgraded 11.1Volt 1,500 Mah 20c LIPO battery with a convenient ON/OFF
power switch and you have a strong and responsive 6-channel CP helicopter.
Plenty of power to finally accelerate this helicopter quickly. We also upgraded
the helicopter in the video with a metal rotor tail boom mount, Super Skids 400,
and extended Carbon Fiber STEALTH Blades.

(Click Here for More Information)

SUPERCHARGE YOUR 2.4GHZ WALKERA V200D02/EXCEED CLASSIMA 300
FLYBARLESS AND WALKERA CB180Z :

While this helicopter flys okay using a stock 7.4 volt 800 Mah LIPO, we felt that
the power it was offering was inadequate for the agressive flying that everyone
demands. So we were able to upgrade the LIPO Battery, Extended the Main
Rotor and Tail Rotor Blades. Below is a video of the flybarless Exceed
Classima 300 using these mods. You can view the difference in flight
performance as well as hear the higher RPM levels. Plenty of Power as this
helicopter is supercharged.
(C lick Here for More Information.)

NEW !!! NEW !!! NEW !!!

DIRECT DRIVE (DD) BRUSHLESS TAIL MOTOR KIT FO R THE 2.4 GHz WALKERA
V 400D02 (CENTURY NEON BLAZE SE) FLYBARLESS 6-Channel CP Helicopter:

Used in conjunction with the Brushless Main Motor Mod, the Direct Drive (DD)
Brushless Tail motor avoids all of the problems with the stock tail motor. The
typical stock carbon brushed tail motor lasts for about 5-6 dozen full flights
before failing and can strip the plastic gear. The tail motor uses gear reduction
which causes power loss to the Rudder Control and the gear teeth eventually
wears out causing additional power loss to the Rudder. The Direct Drive (DD)
Brushless Tail motor uses no gears and offers full power giving Superior
Rudder Control. This is necessary for high speed turns, spins, and dives.

(Click Here for More Information)

MAIN BRUSHLESS MOTOR KIT FOR THE 2.4 GHz WALKERA V370D05
FLYBARLESS 6-Channel CP Helicopter:

Replace your stock carbon brush Main motor with a high-speed Brushless
Main motor. No more heat sinks and fuses to worry about. Couple this with an
extended 7.4 Volt 1,300 Mah 20c LIPO battery with a convenient ON/OFF power
switch and you have a strong and responsive 6-channel CP helicopter. Plenty
of power to finally accelerate this helicopter quickly. We also upgraded the
helicopter in the video with Super Skids 200, adapter 22, and a convenient
ON/OFF Power switch.

(Click Here for More Information)

CONVERT YOUR 2.4 GHZ WALKERA V450D01 FLYBARLESS BELT 6-Channel
CP Helicopter to the NEW 6-AXIS GYRO V450D01 V2 Conversion:

The 2.4GHz Walkera V450D01 Flybarless 6-channel single rotor Collective
Pitched (CP) helicopter is very easy to fly. It is the flybarless version of the
2.4Ghz Walkera Creata 400/ Walkera #36/Exceed Raptor G2. The 3G
Technology allows for stable hoovering as well as precision flying compared to
the old style flybar helicopter design. We did a few easy mods to bling out the
rest of this helicopter. First off, imagine the stability of the 3G Technology and
then imagine using a 6-AXIS GYRO Devo Design. The updated version of this
helicopter now uses the 6-axis Gyro making this helicopter even more super
stable. This was also topped off with the Super Skids 400/adapter 450 and the
Xtreme Production 325mm Carrbon Fiber Blades (Formerly Stealth Blades).
(Click Here for More Information)

CONVERT YOUR WALKERA GENIUS FP to a TOTALLY BRUSHLESS
HELICOPTER:

The new GENIUS FP utilizes the 3-axis Gyro Technology for a super stable
flight making it easier for any beginner to pilot this helicopter. We appreciated
the new 3G RX and blinged it out with a Totally Brushless Mod. A strong 12,000
RPM main brushless outrunner motor and a Direct Drive (DD) Brushless Tail
Motor with a higher pitched tail rotor blalde for superior Rudder Control.

CONVERT YOUR WALKERA U-FLY/U-FLY(s) to a FLYBARLESS CNC METAL
RO TOR HEAD:

With the 3-axis Gyro RX you can also now remove the flybar rotor head system
by simply removing the top rotor assembly with linkgages and then installing
the new flybarless rotor kit. It will make it easier to repair as there are no more
flybar paddles and flybar rods to repair anymore. The helicopter flys great with
the new flybarless head.

(Move your mouse pointer over the picture below to see the difference.)

CUSTOM FUSUNO FIBERGLASS CANOPIES FOR THE WALKERA
V 200D01/02/CB180D/Z AND EXCEED MADHAWK 300/CLASSIMA 300:

Get the FUSUNO Fiber Glass Canopies to customize your helicopter. These
canopies are very strong, resist cracking, and look awesome versus the stock
canopy. Siz design schemes are available. Get them while they are hot !!!

(Click Here for More Information)

Source: Uploaded by user via Maiysha on Pinterest

Description: ALIGN AP800 Digital Pitch
Gauge (HET80001) - A must have for calibrating
FLYBARLESS Helicopters and traditional flybar
helicopters. Flybarless RC helicopters make it difficult
to adjust/check the pitch set-up of helicopters main
rotor blades. The ALIGN Gauge offers simplicity,
accuracy, and fast pitch angle measurement.

Features:
Auto-detecting Horizontal level.
Uses backlighting LCD monitor.
Zero and Lock function.
Detectable pitch range: -90° ~ 90°.
Automatic screen rotation.
Suitable for 200~800mm main blades.
Build-in energy saving function. Power shuts down
after 3 mins without any movement.

Price: $34.99
1 Piece

FEATURED PRODUCT

MAIN BRUSHLESS MOTOR and BRUSHLESS DIRECT DRIVE (DD) TAIL MOTOR
KIT FOR THE 2.4 GHz WALKERA MASTER CP FLYBARLESS 6-Channel CP
Helicopter:

Replace your stock carbon brush Main motor with a high-speed Brushless
Main motor and stock carbon brushed motor with a Direct Drive (DD) Brushless
Tail Motor. No more heat sinks and fuses to worry about. Couple this with the
Xtreme Production CNC Metal Rotor Head Assembly and Metal Gear (MG)
Cyclic Servos and you have a strong and responsive 200 Size 6-Channel CP
helicopter. Plenty of power to finally accelerate this helicopter quickly.

(Click Here for More Information)

NEW !!! NEW !!! NEW !!!

XTREME PRODUCTIONS PRESENTS MODS FOR YOUR EFLITE BLADE 130X
FLYBARLESS CP HELICOPTER :

Xtreme Productions brings the latest CNC Aluminum Metal Rotor Head
Assembly, all around Steel Bevel Gears, Carbon Fiber Airframe, and Titanium
mods to your Eflite Blade 130x CP Helicopter. Start out with a CNC Metal Rotor
Head Assembly and an all carbon fiber airframe mounted to a cool landing
skid. Also check out the latest Steel Bevel Gears for the front and tail end
sections. Bling out your Eflite Blade 130x today !

(Click Here for More Information)

NEW !!! NEW !!! NEW !!!

OTHER STUFF

HELICOPTER MODS

HELICOPTER ACCESSORIES

ALIGN TREX R/C

NEW !

E-SKY R/C

WALKERA R/C

NEW !

E-FLITE R/C

NEW !